Shenzhen Eco Polyfoam Products Co., Ltd.
We are committed to enrich the supply chain with all kinds of foam and foam-related products to meet your current and future demands.
Add to Cart
Double Sided Aluminum Foil XLPE XPE Foam Thermal Insulation Material For Roof
The product is a new environmental friendly thermal insulation material. Manufactured with a patented closed-cell foam structure sandwiched by highly reflective foil surfaces, it is the fibre-free, non-allergenic alternative to conventional bulk insulation. Designed for warehouses and commercial or industrial sheds where the insulation acts as the wall or ceiling lining. 3-in-1 insulation, vapour barrier and radiant barrier.
We can also do reflective anti-glare insulation, it can protect the eyes of construction workers from being hurt by strong sunlight reflection, make the construction process safer.
Reflective foil XPE foam is your solution for shed insulation, achieving comfortable indoor temperatures that are significantly cooler in summer and warmer in winter
XPE foam with double sided Aluminum Foil:
| Thickness (mm) | Width(mm) | Length(m) | Remark |
| 4 | 1200,1350,1500 | 20.22.25.40.50 |
1.Both sides in aluminum foil faced 2.R value ≥2,based on thickness 3.Emissivity≥90% or ≥95%,based on foil type. 4.Thickness,width and length can be customized by customer's requests |
| 5 | 1200,1350,1500 | 20,22,25,40,50 | |
| 6 | 1200,1350,1500 | 20,22,25,40,50 | |
| 7 | 1200,1350,1500 | 20,22,25,40,50 | |
| 8 | 1200,1350,1500 | 20,40,50, | |
| 10 | 1200,1350,1500 | 20,40 |
Specification:
| Item | Test method | Index |
| Material: | closed cell polyethylene foam | |
| Density | DIN 53571/ISO standard 345 | 25kg/m³ |
| Thermal conductivity:(JIS A 1413)@20C 50-70%R.H. | At 10℃ | 0.032W/Mk |
| ISO standard 2581 | At 20℃ | 0.034K/Mk |
| At 40℃ | 0.038K/Mk | |
| Tensile strength DIN 53571/ISO standard 1926 | lengthwise | 4.1kPa/mm³ |
| Crosswise | 3.0kPa/mm³ | |
| Tensile elongation ISO Standard 1926 | lengthwise | 130% |
| Crosswise | 135% | |
| Shore hardness | 13/30 | |
| Dimensional change on heating 22hrs@70℃ | lengthwise | 2.00% |
| Crosswise | 0.50% | |
| Tear strength (DIN 53571) | lengthwise | 1.8kPa/cm |
| Crosswise | 1.1kPa/cm | |
| Compression strength: ISO standard 844 | deflection 10% | 12kpa |
| deflection 25% | 25kpa | |
| Deflection 50% | 65kpa | |
| Compression set:ISO Standard 1856C deflection 25% | 0.5h after discharge | 25% |
| 25hr after discharge | 17% | |
| Pulsating comprehensive loads (DIN 53574) | 0.23kg/cm³ | |
| Comprehensive load ctcles: | 1,000,000 | no damage, Loss in thickness 1% |
| Water vapour permeance: | 3.3* 10-4 g/M.N.s | |
| Water vapour permeability: (ASTM E96) | 8.19*10-15kg/pa.s.m(0.029mg.m/N.h) | |
| Water absorption by volume:(DIN 53428) | after 7 days | 0.70% |
| after 28days | 0.80% | |
| Working temperature | -80℃ to 100℃ | |
| Noise reduction co-efficient | (AS1045-1971) | 0.15 |
| Dynamic stiffness: | 5mm thick | 164NM/ m³ |
| 10mm thick | 74NM/ m³ |
FAQ:
Q1:How can I place an order?
1)Tell us the size details and quantity you want to order.
2)We will make PI for you.
3)Checking PI and confirm it for us, we will arrange the production ASAP when the prepayment received.
4)We will take photos for you to confirm and then deliver the goods soon after the balance.
5)Send the Customs Clearance Documents or tracking number to you and track the goods for you until you get it.
Q2:What are the differences between XPE and IXPE?
XPE is chemically cross-linked, with rough surface. IXPE is physically cross-linked, with
smooth surface.
Q3:Is XLPE foam recyclable?
Due to it is crosslinked and close cell, it is hard to recyclable. But the wasted pe foam could be reused again, like to be remade
to be mattress, underlay, furniture filling etc